ResoRod Ultrasonic Transducer for Cleaning
ResoRod ultrasonic transducer for cleaning show do ResoRod ultrasonic transducer for cleanings work convert the high-frequency electric signal of an ultrasonic cleaning system to sound waves in the cleaning solution. These systems are made up of an ultrasonic generator, a transducer and a tank to hold the cleaning solution. Low frequencies from 20 kHz to about 160 kHz are used for cleaning heavy, hard to clean contamination from robust parts while higher frequencies up to 2MHz are used for gentle cleaning of delicate parts. The ultrasonic generator produces an electric signal whose voltage varies at the selected ultrasonic frequency. When the voltage is applied to piezoelectric crystals within transducers, the crystals change shape slightly. As the voltage rises and falls, the crystals lengthen and shorten. As a result, the metal plate attached to the crystals vibrates in tune with the ultrasonic frequency. When the transducer is immersed in the cleaning solution, the vibration of the metal plate produces the ultrasonic waves.
Advantages of ResoRod Ultrasonic Transducer For Cleaning
Time savings
ResoRod ultrasonic transducer for cleaning emit up to 40 thousand sound pulses per second, and each pulse provides cleaning action as it impacts the part surface. Because of this high-frequency wave action, ResoRod ultrasonic transducer for cleaning can remove contaminants faster and better than other types of cleaners.
Gentle cleaning
ResoRod ultrasonic transducer for cleaning remove contaminants without abrasion, harsh scrubbing, or high-pressure sprays, making them ideal to clean even the most delicate parts. This is why they are used to clean microchips, computer parts, plated parts, and irreplaceable family heirlooms.
Versatile contaminant removal
ResoRod ultrasonic transducer for cleaning can remove an almost endless variety of contaminants from a part’ s surface, including oil, grease, wax, shavings, dirt, dust, clay, sand, parting compound, soot, carbon, and oxidation, down to a microscopic particle size. No other parts cleaning system offers that level of flexibility in the same unit.
Low power consumption
Compared to other types of parts-cleaning systems that use a variety of motors to pump, spray, circulate, agitate, and capture the cleaning chemical and its vapors, ResoRod ultrasonic transducer for cleaning need only one small motor to filter the solution. The rest of the cleaning is done with efficient electrical energy and transducers, keeping power consumption to a minimum.
Why Choose Us
Our Factory
The company has assembled top industry technical talents along with seasoned marketing and management professionals. Leveraging cutting-edge proprietary core technologies, it specializes in researching, developing, and selling high-performance power ultrasonic core components and related complete sets of equipment. With around 2000 square meters of research and production facilities, the company possesses a well-equipped testing center capable of conducting more than 120 types of tests in six categories.
Our Certificate
National high-tech enterprise; GB/T19001-2016/ISO9001:2015 quality management system certification; 23 patents and 3 software copyrights granted.
Production equipment
Three-axis machining center, CNC lathe, high-temperature aging furnace, ultrasonic component analyzer, high-precision oscilloscope, power analyzer, cavitation intensity measurement instrument, spectrum analyzer, laser particle size analyzer, digital bridge, infrared thermal imaging instrument, microscope, laser vibrometer, etc.
Production market
The company's products are widely used in various industries such as new materials, fine chemicals, automotive, and new energy. Since its establishment, it has achieved cumulative sales of over 45 million RMB.
Depending on the cleaning application and the different kinds of cleaning required, either immersible, bolt-on or mounted types of ResoRod ultrasonic transducer for cleanings can be used. The immersible ultrasonic ResoRod ultrasonic transducer for cleanings are independent units and are the most flexible in their application. The bolt-on units are for semi-permanent placement on a cleaning tank and the mounted units are integrated in the tank. Each type is functionally the same but the mounting method is determined by how the ultrasonic cleaning system will be used.
For cleaning applications using existing tanks, the immersible or bolt-on types of ResoRod ultrasonic transducer for cleaning are the most appropriate. The immersible type is more flexible and can be placed into different tanks or different ResoRod ultrasonic transducer for cleanings can be used for the same tank. These immersible ResoRod ultrasonic transducer for cleanings simply attach to the ultrasonic generator with a cable and they can then be moved around and placed into the cleaning solution without any installation procedure. The bolt-on type of ResoRod ultrasonic transducer for cleaning is more appropriate for cleaning applications of one particular kind. If the same kinds of parts are cleaned regularly, the frequency, power and cleaning tanks remain unchanged. In this case, the ResoRod ultrasonic transducer for cleanings can be bolted onto the tanks and left there. ResoRod ultrasonic transducer for cleanings can be mounted along the walls of the tanks or on the bottom.
Mounted ResoRod ultrasonic transducer for cleanings are often integrated into a turnkey system that customers can buy for a specific application. These systems are less flexible but everything needed is functionally matched and included in the turnkey package and offers a cost effective solution.
How ResoRod Ultrasonic Transducer For Cleaning Work and Are Used in Industrial Cleaning Applications




In industrial ultrasonic cleaning systems, a generator produces the electric high-frequency signal and a transducer converts the signal into physical sound waves in the cleaning solution. Depending on the application, ResoRod ultrasonic transducer for cleaning can handle different frequencies and deliver enough power to fill the cleaning tank with ultrasonic waves. For existing tanks, moveable immersible transducers are the most flexible solution while new tanks and turnkey often have permanently installed transducers.
ResoRod ultrasonic transducer for cleaning consist of a thick metal plate and active parts that vibrate when an electrical signal is applied. For piezoelectric transducers, the active parts consist of piezoelectric material that changes shape in tune with the frequency of the electric signal. For magnetostrictive transducers, metallic plates vibrate in tune with the high-frequency magnetic field created by the electric signal. In either case, the vibrations are transmitted to the heavy metal plate that then transmits the vibrations to the cleaning solution.When the ultrasonic waves pass from the transducer’s metal plate through the cleaning solution, the wave troughs create low pressure regions that produce cavitation bubbles. The bubbles form during the wave troughs and collapse at the subsequent wave peaks, releasing jets of energy. The collapse of the bubbles scrubs the parts to be cleaned and dislodges dirt and contaminants from the part surface. In this way, the transducer turns the electric signal from the ultrasonic generator into physical scrubbing and cleaning action.
Historically piezoelectric materials such as quartz crystals were delicate and had a relatively short lifetime when used in ultrasonic cleaning applications. Magnetostrictive transducers consist of metal plates and coils of wire that are not easily damaged. At one time the latter were used in ultrasonic cleaning systems almost exclusively because they were more reliable. New advances in piezoelectric materials contributed to the re-emergence of the piezoelectric transducer as the technology of choice. The new materials are rugged and they can be used up to the highest megahertz frequencies. The vibrating function of magnetostrictive transducers depends on the size of the metal plates. Higher frequencies require shorter plates and there is a limit to how much the size of the plates can be reduced. As a result, magnetostrictive transducers can only be used for the lower frequencies.
The Process Involved in ResoRod Ultrasonic Transducer For Cleaning
Cavitation is done with high-frequency sound waves. It induces a pressure change in the cleaning solution which creates microscopic bubbles. It produces heat and energy. Implosion occurs when ‘bubbling’ begins at the substrate of the equipment being cleaned. Shock waves remove the persistent dirt or grease. The bubbles are extremely small and travel through a fluid or cleaning solution. They reach the sharpest edges or crevices where manual cleaning is not possible. Agitation is the final stage when the dirt and debris are carried away and completely dislodged from the part being cleaned.
In order to ensure that the cleaning process is successful it is important to understand four factors that impact its overall performance. Higher frequency produces smaller bubbles. They are ideal for cleaning sensitive instruments and parts of a machine. For aggressive cleaning low frequency is suitable. Industries where heavy duty equipment is used require this efficiency to sterilise. A good power supply will induce better implosion. It has a better cleaning action. High powered process can damage delicate items or parts of a machine.
The right cleaning solution is important. Chemical compounds tend to erode parts of the machine. Different cleaning solutions are required to remove debris and dirt that is stuck to the machine parts. Heat is another important factor that impacts the results of any cleaning process. If the fluid is heated enough it can make a difference. A trained operator will introduce the heated solution at the right time. Otherwise damage is imminent or proper cleaning is affected. If you are keen to know the right steps in the cleaning system with the right Ultrasonic transducers give us a call. Our experts can offer more technical notes and prepare you for the best results.
ResoRod Ultrasonic Transducer For Cleaning Process Considerations
Cleaning solution properties
The cleaning solution not only acts as the medium where the ultrasonic wave propagates but also influences the amount and size of the cavitation bubbles produced. Therefore, the cleaning solution's properties significant affect the cavitation induced. Vapor pressure: In fluid machinery, particularly pumps, the vapor pressure of the fluid is important as it directly affects the susceptibility of cavitation within the pump. Cavitation is formed when the pressure of the liquid falls below its vapor pressure. Thus, liquids with higher vapor pressure can easily develop cavitation since less effort is needed to go below the point of vaporization point. This means less power is required. However, since less power is required to form the bubble, less energy is absorbed and less energy will be released. Therefore, liquids with moderate vapor pressure are desired. Surface tension: Like vapor pressure, surface tension affects the formation of cavitation bubbles. High surface tension means more force is required to break the cohesive forces between the liquid molecules; thus, more energy is required to produce cavitation. Still, high surface tension is necessary to store large amounts of energy in the bubble. Moreover, surface tension affects the "wetness" of the solution. Making the solution "wetter" means better coverage of small areas on the surface of the part.
Bath temperature
Temperature affects the amount and intensity of cavitation by modifying the properties of the cleaning solution. The temperature has a direct effect on the properties of the liquid. Increasing the temperature increases vapor pressure increases while surface tension, viscosity, and density decrease. High vapor pressure and low surface tension, viscosity, and density tend to create more cavitation activity. Temperature not only increases the effect of cavitation but the cleaning solution's effectiveness as well. Usually, higher temperature results in more chemical activity. Higher temperatures also promote better mass transport. This means debris, oils, and other contaminants removed from the part are easily dispersed and dissolved.
Solution chemistry
Chemicals are added to improve cleaning efficiency by modifying the cleaning liquid‘s properties to facilitate better cavitation. Aside from ultrasonic cavitation, chemicals are also used to help in dissolve and separate contaminants removed from the part. These may be present in the ultrasonic bath or the succeeding rinsing stages. Water is used as the general solvent for ultrasonic cleaning applications since it is cheap, readily available, and has the right range of properties under ambient temperatures. Chemicals such as alkaline detergents, acidic solutions, enzymes, and other special chemicals are added to modify its properties and include additional functions.
Frequency range
Certain frequency range performs better in specific applications than other frequencies. There is no specific frequency that fits all applications. A general rule would be lower frequencies tend to produce greater cavitation, while higher frequencies produce less intense but finer cavitation. Low frequencies are not effective at removing microscopic particles. Surfaces have tiny troughs where particles can lodge into. Below are some of the frequency ranges used and their application.
How Are ResoRod Ultrasonic Transducer For Cleaning Bonded to the Radiating Surface?
Most manufacturers of piezoelectric ResoRod ultrasonic transducer for cleaning systems use high-temperature epoxy to attach the transducers to its radiating surface. Zenith bonds its transducers using a metallurgical stud, and uses epoxy to prevent the ROTATION of the transducer off of this stud, leading a significantly greater bond strength than when using epoxy alone. In fact, if you used a hammer and attempted to break one of our transducers off of the tank, you would rip a hole in the tank rather than detaching the transducer! Magnetostrictive transducers are bonded using vacuum brazing of the transducer base to the ResoRod ultrasonic transducer for cleaning diaphragm.
Manufacturers of magnetostrictive ResoRod ultrasonic transducer for cleaning designs are quick to point out that a vacuum-brazed transducer bond is superior to an epoxy-bonded transducer. This may be the case when dealing with Zenith competitors, but it is NOT the case when comparing to Zenith’s transducer bonding system. Epoxy-bonded transducers without the metallurgic stud cannot withstand highly abusive environments, such as environments in which objects may be dropped onto the diaphragm which may cause damage to the epoxy bond. However, these environments do not exist in 99% of ResoRod ultrasonic transducer for cleaning cleaning operations. Additionally, transducers can easily be protected against such damage.
Our factory
Resonance Technology (Ningbo) Co. Ltd, founded in December 2019 with a registered capital of 10 million RMB, is located in the High-tech Zone Ningbo, China. The company has assembled top industry technical talents along with seasoned marketing and management professionals. Leveraging cutting-edge proprietary core technologies, it specializes in researching, developing, and selling high-performance power ultrasonic core components and related complete sets of equipment. The company's products are widely used in various industries such as new materials, fine chemicals, automotive, and new energy. Currently, the company has mastered core technologies in power ultrasonics including control algorithms, power amplification, drive matching, high-power transducer, and vibration system design. Its products have reached international leading levels, with over 40 patent applications and 23 patents granted. We have obtained the GB/T19001-2016/ISO9001:2015 quality management system certification. With around 2000 square meters of research and production facilities, the company possesses a well-equipped testing center capable of conducting more than 120 types of tests in six categories including physical performance, mechanical performance, environmental testing, simulation testing, chemical testing, and precision measurement.

FAQ
As one of the leading resorod ultrasonic transducer for cleaning manufacturers and suppliers in China, we warmly welcome you to buy resorod ultrasonic transducer for cleaning for sale here from our factory. All customized products are with high quality and competitive price.
resorod 35 ultrasonic transducer for cleaning, resorod 25 h ultrasonic transducer for cleaning, resorod 30 ultrasonic transducer for cleaning











